TY - JOUR AU - Agarwal, G. AU - Lattimer, B. PY - 2012 DA - 2012// TI - Method for measuring the standard heat of decomposition of materials JO - Thermochim Acta VL - 545 UR - https://doi.org/10.1016/j.tca.2012.06.027 DO - 10.1016/j.tca.2012.06.027 ID - Agarwal2012 ER - TY - JOUR AU - Avrami, M. PY - 1939 DA - 1939// TI - Kinetics of phase change. I: General theory JO - J Chem Phys VL - 7 UR - https://doi.org/10.1063/1.1750380 DO - 10.1063/1.1750380 ID - Avrami1939 ER - TY - STD TI - Allen B (2012) Thermomechanical behavior and creep response of marine-grade aluminum alloys. Thesis, Virginia Polytechnic Institute & State University ID - ref3 ER - TY - BOOK AU - Amdahl, J. AU - Langhelle, N. K. AU - Lundberg, S. PY - 2001 DA - 2001// TI - Aluminium plated structures at elevated temperatures PB - Proc. OMAE 2001 CY - Rio de Janeiro, Brazil ID - Amdahl2001 ER - TY - JOUR AU - Anderson, P. M. AU - Shewmon, P. G. PY - 2000 DA - 2000// TI - Stress redistribution and cavity nucleation near a diffusively growing grain boundary cavity JO - Mech Mater VL - 32 UR - https://doi.org/10.1016/S0167-6636(99)00048-4 DO - 10.1016/S0167-6636(99)00048-4 ID - Anderson2000 ER - TY - JOUR AU - Aouabdia, Y. AU - Boubertakh, A. AU - Hamamda, S. PY - 2010 DA - 2010// TI - Precipitation kinetics of the hardening phase in two 6061 aluminium alloys JO - Mater Lett VL - 64 UR - https://doi.org/10.1016/j.matlet.2009.11.014 DO - 10.1016/j.matlet.2009.11.014 ID - Aouabdia2010 ER - TY - BOOK PY - 2011 DA - 2011// TI - Standard E139, 2011: Standard test methods for conducting creep, creep-rupture, and stress-rupture tests of metallic materials PB - ASTM Interntaional CY - West Conshohocken, PA ID - ref7 ER - TY - BOOK PY - 2005 DA - 2005// TI - Standard test method for determining specific heat capacity by differential scanning calorimetry PB - ASTM International CY - West Conshohocken, PA ID - ref8 ER - TY - BOOK PY - 2013 DA - 2013// TI - Standard test method for thermal diffusivity by the flash method PB - ASTM International CY - West Conshohocken, PA ID - ref9 ER - TY - BOOK PY - 2009 DA - 2009// TI - Standard test methods for elevated temperature tension tests of metallic materials PB - ASTM International CY - West Conshohocken, PA ID - ref10 ER - TY - JOUR AU - Bahrami, A. AU - Miroux, A. AU - Sietsma, J. PY - 2012 DA - 2012// TI - An age-hardening model for Al-Mg-Si alloys considering needle-shaped precipitates JO - Metall Mater Trans A VL - 43 UR - https://doi.org/10.1007/s11661-012-1211-8 DO - 10.1007/s11661-012-1211-8 ID - Bahrami2012 ER - TY - JOUR AU - Bardel, D. AU - Perez, M. AU - Nelias, D. AU - Deschamps, A. AU - Hutchinson, C. R. AU - Maisonnette, D. AU - Chaise, T. AU - Garnier, J. AU - Bourlier, F. PY - 2014 DA - 2014// TI - Coupled precipitation and yield strength modelling for non-isothermal treatments of a 6061 aluminium alloy JO - Acta Mater VL - 62 UR - https://doi.org/10.1016/j.actamat.2013.09.041 DO - 10.1016/j.actamat.2013.09.041 ID - Bardel2014 ER - TY - JOUR AU - Barlat, F. AU - Glazov, M. V. AU - Brem, J. C. AU - Lege, D. J. PY - 2002 DA - 2002// TI - A simple model for dislocation behavior, strain and strain rate hardening evolution in deforming aluminum alloys JO - Int J Plast VL - 18 UR - https://doi.org/10.1016/S0749-6419(01)00015-8 DO - 10.1016/S0749-6419(01)00015-8 ID - Barlat2002 ER - TY - JOUR AU - Bay, B. AU - Hansen, N. PY - 1979 DA - 1979// TI - Initial stages of recrystallization in aluminum of commercial purity JO - Metall Trans A VL - 10 UR - https://doi.org/10.1007/BF02658335 DO - 10.1007/BF02658335 ID - Bay1979 ER - TY - JOUR AU - Bay, B. AU - Hansen, N. PY - 1984 DA - 1984// TI - Recrystallization in commercially pure aluminum JO - Metall Trans A VL - 15 UR - https://doi.org/10.1007/BF02645114 DO - 10.1007/BF02645114 ID - Bay1984 ER - TY - JOUR AU - Bratland, D. H. AU - Grong, Ø. AU - Shercliff, H. AU - Myhr, O. R. AU - Tjøtta, S. PY - 1997 DA - 1997// TI - Modelling of precipitation reactions in industrial processing JO - Acta Mater VL - 45 UR - https://doi.org/10.1016/S1359-6454(96)00100-0 DO - 10.1016/S1359-6454(96)00100-0 ID - Bratland1997 ER - TY - BOOK PY - 2007 DA - 2007// TI - BS EN 1999-1-2:2007. Eurocode 9 - Design of aluminum structures, Part 1-2: Structural fire design PB - BSI CY - London, UK ID - ref17 ER - TY - JOUR AU - Bunge, H. J. AU - Wagner, F. AU - Welch, P. I. AU - Houtte, P. PY - 1985 DA - 1985// TI - A new way to include the grain shape in texture simulations with the Taylor model JO - J Phys Lett VL - 46 UR - https://doi.org/10.1051/jphyslet:0198500460230110900 DO - 10.1051/jphyslet:0198500460230110900 ID - Bunge1985 ER - TY - JOUR AU - Chen, I. -. W. PY - 1983 DA - 1983// TI - Mechanisms of cavity growth in creep JO - Scr Metall VL - 17 UR - https://doi.org/10.1016/0036-9748(83)90063-7 DO - 10.1016/0036-9748(83)90063-7 ID - Chen1983 ER - TY - STD TI - Chen Y (2014) Stress-induced damage and post-fire response of aluminum alloys. Dissertation, Virginia Polytechnic Institute & State University ID - ref20 ER - TY - JOUR AU - Cheng, L. M. AU - Poole, W. J. AU - Embury, J. D. AU - Lloyd, D. J. PY - 2003 DA - 2003// TI - The influence of precipitation on the work-hardening behavior of the aluminum alloys AA6111 and AA7030 JO - Metall Mater Trans A VL - 34 UR - https://doi.org/10.1007/s11661-003-0007-2 DO - 10.1007/s11661-003-0007-2 ID - Cheng2003 ER - TY - JOUR AU - Clausen, A. H. AU - Børvik, T. AU - Hopperstad, O. S. AU - Benallal, A. PY - 2004 DA - 2004// TI - Flow and fracture characteristics of aluminium alloy AA5083–H116 as function of strain rate, temperature and triaxiality JO - Mater Sci Eng A VL - 364 UR - https://doi.org/10.1016/j.msea.2003.08.027 DO - 10.1016/j.msea.2003.08.027 ID - Clausen2004 ER - TY - JOUR AU - Cocks, A. C. F. AU - Ashby, M. F. PY - 1982 DA - 1982// TI - Creep fracture by coupled power-law creep and diffusion under multiaxial stress JO - Met Sci VL - 16 UR - https://doi.org/10.1179/msc.1982.16.10.465 DO - 10.1179/msc.1982.16.10.465 ID - Cocks1982 ER - TY - BOOK AU - Courtney, T. H. PY - 2000 DA - 2000// TI - Mechanical behavior of materials PB - McGraw-Hill CY - New York ID - Courtney2000 ER - TY - JOUR AU - Deschamps, A. AU - Bréchet, Y. PY - 1998 DA - 1998// TI - Influence of predeformation and ageing of an Al–Zn–Mg alloy—II. Modeling of precipitation kinetics and yield stress JO - Acta Mater VL - 47 UR - https://doi.org/10.1016/S1359-6454(98)00296-1 DO - 10.1016/S1359-6454(98)00296-1 ID - Deschamps1998 ER - TY - JOUR AU - Deschamps, A. AU - Niewczas, M. AU - Bley, F. AU - Bréchet, Y. AU - Embury, J. D. AU - Sinq, L. AU - Livet, F. AU - Simon, J. P. PY - 1999 DA - 1999// TI - Low-temperature dynamic precipitation in a supersaturated AI-Zn-Mg alloy and related strain hardening JO - Philos Mag A VL - 79 UR - https://doi.org/10.1080/01418619908214295 DO - 10.1080/01418619908214295 ID - Deschamps1999 ER - TY - BOOK AU - Dieter, G. PY - 1976 DA - 1976// TI - Mechanical metallurgy PB - McGraw-Hill CY - New York ID - Dieter1976 ER - TY - JOUR AU - Doan, L. C. AU - Ohmori, Y. AU - Nakai, K. PY - 2000 DA - 2000// TI - Precipitation and dissolution reactions in a 6061 aluminum alloy JO - JIM, Mater Trans VL - 41 UR - https://doi.org/10.2320/matertrans1989.41.300 DO - 10.2320/matertrans1989.41.300 ID - Doan2000 ER - TY - JOUR AU - Doherty, R. D. AU - Hughes, D. A. AU - Humphreys, F. J. AU - Jonas, J. J. AU - Juul Jensen, D. AU - Kassner, M. E. AU - King, M. E. AU - McNelley, T. R. AU - McQueen, H. J. AU - Rollet, A. D. PY - 1997 DA - 1997// TI - Current issues in recrystallization: a review JO - Mater Sci Eng A VL - 238 UR - https://doi.org/10.1016/S0921-5093(97)00424-3 DO - 10.1016/S0921-5093(97)00424-3 ID - Doherty1997 ER - TY - JOUR AU - Edwards, G. A. AU - Stiller, K. AU - Dunlop, G. L. AU - Couper, M. J. PY - 1998 DA - 1998// TI - The precipitation sequence in Al-Mg-Si alloys JO - Acta Mater VL - 46 UR - https://doi.org/10.1016/S1359-6454(98)00059-7 DO - 10.1016/S1359-6454(98)00059-7 ID - Edwards1998 ER - TY - JOUR AU - El-Danaf, E. A. AU - AlMajid, A. A. AU - Soliman, M. S. PY - 2008 DA - 2008// TI - Hot deformation of AA6082-T4 aluminum alloy JO - J Mater Sci VL - 43 UR - https://doi.org/10.1007/s10853-008-2895-4 DO - 10.1007/s10853-008-2895-4 ID - El-Danaf2008 ER - TY - JOUR AU - Esmaeili, S. AU - Lloyd, D. J. PY - 2005 DA - 2005// TI - Characterization of the evolution of the volume fraction of precipitates in aged AlMgSiCu alloys using DSC technique JO - Mater Charact VL - 55 UR - https://doi.org/10.1016/j.matchar.2005.07.007 DO - 10.1016/j.matchar.2005.07.007 ID - Esmaeili2005 ER - TY - CHAP AU - Estrin, Y. ED - Krausz, A. ED - Krausz, K. PY - 1996 DA - 1996// TI - Dislocation-density-related constitutive modeling BT - Unified constitutive laws of plastic deformation PB - Academic Press CY - San Diego ID - Estrin1996 ER - TY - JOUR AU - Estrin, Y. AU - Mecking, H. PY - 1984 DA - 1984// TI - A unified phenomenological description of work hardening and creep based on one-parameter models JO - Acta Metall VL - 32 UR - https://doi.org/10.1016/0001-6160(84)90202-5 DO - 10.1016/0001-6160(84)90202-5 ID - Estrin1984 ER - TY - BOOK AU - Evans, H. E. PY - 1984 DA - 1984// TI - Mechanisms of creep fracture PB - Elsevier Applied Science CY - London ID - Evans1984 ER - TY - JOUR AU - Faggiano, B. AU - Matteis, G. AU - Landolfo, R. AU - Mazzolani, F. M. PY - 2004 DA - 2004// TI - Behaviour of aluminium alloy structures under fire JO - J Civ Eng Manag VL - 10 UR - https://doi.org/10.1080/13923730.2004.9636305 DO - 10.1080/13923730.2004.9636305 ID - Faggiano2004 ER - TY - JOUR AU - Fujita, H. AU - Tabata, T. PY - 1973 DA - 1973// TI - The effect of grain size and deformation sub-structure on mechanical properties of polycrystalline aluminum JO - Acta Metall VL - 21 UR - https://doi.org/10.1016/0001-6160(73)90191-0 DO - 10.1016/0001-6160(73)90191-0 ID - Fujita1973 ER - TY - JOUR AU - Furu, T. AU - Ørsund, R. AU - Nes, E. PY - 1995 DA - 1995// TI - Subgrain growth in heavily deformed aluminium—experimental investigation and modelling treatment JO - Acta Metall Mater VL - 43 UR - https://doi.org/10.1016/0956-7151(94)00410-2 DO - 10.1016/0956-7151(94)00410-2 ID - Furu1995 ER - TY - JOUR AU - Gaber, A. AU - Gaffar, M. A. AU - Mostafa, M. S. AU - Abo Zeid, A. F. PY - 2006 DA - 2006// TI - Investigation of developed precipitates in Al–1·1 wt-%Mg2Si balanced alloy by DSC and SEM techniques JO - Mater Sci Technol VL - 22 UR - https://doi.org/10.1179/174328406X100707 DO - 10.1179/174328406X100707 ID - Gaber2006 ER - TY - JOUR AU - Gallais, C. AU - Simar, A. AU - Fabregue, D. AU - Denquin, A. AU - Lapasset, G. AU - Meester, B. AU - Brechet, Y. AU - Pardoen, T. PY - 2007 DA - 2007// TI - Multiscale analysis of the strength and ductility of AA 6056 aluminum friction stir welds JO - Metall Mater Trans A VL - 38 UR - https://doi.org/10.1007/s11661-007-9121-x DO - 10.1007/s11661-007-9121-x ID - Gallais2007 ER - TY - JOUR AU - Gallais, C. AU - Denquin, A. AU - Bréchet, Y. AU - Lapasset, G. PY - 2008 DA - 2008// TI - Precipitation microstructures in an AA6056 aluminium alloy after friction stir welding: Characterisation and modelling JO - Mater Sci Eng A VL - 496 UR - https://doi.org/10.1016/j.msea.2008.06.033 DO - 10.1016/j.msea.2008.06.033 ID - Gallais2008 ER - TY - JOUR AU - Goods, S. F. AU - Nix, W. D. PY - 1978 DA - 1978// TI - The kinetics of cavity growth and creep fracture in silver containing implanted grain boundary cavities JO - Acta Metall VL - 26 UR - https://doi.org/10.1016/0001-6160(78)90024-X DO - 10.1016/0001-6160(78)90024-X ID - Goods1978 ER - TY - JOUR AU - Greenwood, J. N. AU - Miller, D. R. AU - Suiter, J. W. PY - 1954 DA - 1954// TI - Intergranular cavitation in stressed metals JO - Acta Metall. VL - 2 UR - https://doi.org/10.1016/0001-6160(54)90166-2 DO - 10.1016/0001-6160(54)90166-2 ID - Greenwood1954 ER - TY - JOUR AU - Grong, Ø. AU - Shercliff, H. R. PY - 2002 DA - 2002// TI - Microstructural modelling in metals processing JO - Prog Mater Sci VL - 47 UR - https://doi.org/10.1016/S0079-6425(00)00004-9 DO - 10.1016/S0079-6425(00)00004-9 ID - Grong2002 ER - TY - JOUR AU - Gupta, A. K. AU - Lloyd, D. J. AU - Court, S. A. PY - 2001 DA - 2001// TI - Precipitation hardening processes in an Al–0.4% Mg–1.3% Si–0.25% Fe aluminum alloy JO - Mater Sci Eng A VL - 301 UR - https://doi.org/10.1016/S0921-5093(00)01814-1 DO - 10.1016/S0921-5093(00)01814-1 ID - Gupta2001 ER - TY - JOUR AU - Hancock, J. W. PY - 1976 DA - 1976// TI - Creep cavitation without a vacancy flux JO - Met Sci VL - 10 UR - https://doi.org/10.1179/msc.1976.10.9.319 DO - 10.1179/msc.1976.10.9.319 ID - Hancock1976 ER - TY - JOUR AU - Hasegawa, T. AU - Kocks, U. F. PY - 1979 DA - 1979// TI - Thermal recovery processes in deformed aluminum JO - Acta Metall VL - 27 UR - https://doi.org/10.1016/0001-6160(79)90085-3 DO - 10.1016/0001-6160(79)90085-3 ID - Hasegawa1979 ER - TY - JOUR AU - Huang, Y. AU - Humphreys, F. J. PY - 1999 DA - 1999// TI - Measurements of grain boundary mobility during recrystallization of a single-phase aluminium alloy JO - Acta Mater VL - 47 UR - https://doi.org/10.1016/S1359-6454(99)00062-2 DO - 10.1016/S1359-6454(99)00062-2 ID - Huang1999 ER - TY - JOUR AU - Huang, Y. AU - Humphreys, F. J. PY - 2012 DA - 2012// TI - The effect of solutes on grain boundary mobility during recrystallization and grain growth in some single-phase aluminium alloys JO - Mater Chem Phys VL - 132 UR - https://doi.org/10.1016/j.matchemphys.2011.11.018 DO - 10.1016/j.matchemphys.2011.11.018 ID - Huang2012 ER - TY - JOUR AU - Hulla, D. AU - Rimmera, D. E. PY - 1959 DA - 1959// TI - The growth of grain-boundary voids under stress JO - Philos Mag A VL - 4 UR - https://doi.org/10.1080/14786435908243264 DO - 10.1080/14786435908243264 ID - Hulla1959 ER - TY - JOUR AU - Huskins, E. L. AU - Cao, B. AU - Ramesh, K. T. PY - 2010 DA - 2010// TI - Strengthening mechanisms in an Al–Mg alloy JO - Mater Sci Eng A VL - 527 UR - https://doi.org/10.1016/j.msea.2009.11.056 DO - 10.1016/j.msea.2009.11.056 ID - Huskins2010 ER - TY - BOOK AU - Incropera, F. P. AU - DeWitt, D. P. AU - Bergman, T. L. AU - Lavine, A. S. PY - 2007 DA - 2007// TI - Fundamentals of heat and mass transfer PB - Sons CY - Hoboken, NJ ID - Incropera2007 ER - TY - JOUR AU - Johnson, W. A. AU - Mehl, R. PY - 1939 DA - 1939// TI - Reaction kinetics in processes of nucleation and growth JO - Trans AIME VL - 135 ID - Johnson1939 ER - TY - JOUR AU - Jones, A. R. AU - Ralph, B. AU - Hansen, N. PY - 1979 DA - 1979// TI - Subgrain coalescence and the nucleation of recrystallization at grain boundaries in aluminium JO - Proc R Soc London A VL - 368 UR - https://doi.org/10.1098/rspa.1979.0134 DO - 10.1098/rspa.1979.0134 ID - Jones1979 ER - TY - JOUR AU - Kachanov, L. M. PY - 1999 DA - 1999// TI - Rupture time under creep conditions JO - Int. J. Fract. VL - 97 UR - https://doi.org/10.1023/A:1018671022008 DO - 10.1023/A:1018671022008 ID - Kachanov1999 ER - TY - CHAP AU - Kampmann, R. AU - Wagner, R. PY - 1984 DA - 1984// TI - Kinetics of precipitation in metastable binary alloys – theory and application to Cu-1.9 at% Ti and Ni-14 at% Al BT - Decompositions of alloys: the early stages PB - Pergamon Press CY - Oxford, UK UR - https://doi.org/10.1016/B978-0-08-031651-2.50018-5 DO - 10.1016/B978-0-08-031651-2.50018-5 ID - Kampmann1984 ER - TY - JOUR AU - Kandare, E. AU - Feih, S. AU - Lattimer, B. Y. AU - Mouritz, A. P. PY - 2010 DA - 2010// TI - Larson–Miller failure modeling of aluminum in fire JO - Metall Mater Trans A VL - 41 UR - https://doi.org/10.1007/s11661-010-0369-1 DO - 10.1007/s11661-010-0369-1 ID - Kandare2010 ER - TY - JOUR AU - Kassner, M. E. AU - Hayes, T. A. PY - 2003 DA - 2003// TI - Creep cavitation in metals JO - Int J Plast VL - 19 UR - https://doi.org/10.1016/S0749-6419(02)00111-0 DO - 10.1016/S0749-6419(02)00111-0 ID - Kassner2003 ER - TY - BOOK PY - 2000 DA - 2000// TI - Introduction to aluminum alloys and tempers PB - ASM International CY - Metals Park, OH ID - ref59 ER - TY - JOUR AU - Khan, I. N. AU - Starink, M. J. AU - Yan, J. L. PY - 2008 DA - 2008// TI - A model for precipitation kinetics and strengthening in Al–Cu–Mg alloys JO - Mater Sci Eng A VL - 472 UR - https://doi.org/10.1016/j.msea.2007.03.033 DO - 10.1016/j.msea.2007.03.033 ID - Khan2008 ER - TY - STD TI - Kocks UF (1976) Laws for work-hardening and low-temperature creep. J Eng Mater Technol 76–85 ID - ref61 ER - TY - JOUR AU - Kocks, U. F. AU - Mecking, H. PY - 2003 DA - 2003// TI - Physics and phenomenology of strain hardening: the FCC case JO - Prog Mater Sci VL - 48 UR - https://doi.org/10.1016/S0079-6425(02)00003-8 DO - 10.1016/S0079-6425(02)00003-8 ID - Kocks2003 ER - TY - JOUR AU - Kolmogorov, A. N. PY - 1937 DA - 1937// TI - A statistical theory for the recrystallization of metals JO - Izv Akad Nauk SSSR VL - 3 ID - Kolmogorov1937 ER - TY - JOUR AU - Konopleva, E. V. AU - McQueen, H. J. AU - Evangelista, E. PY - 1995 DA - 1995// TI - Serrated grain boundaries in hot-worked aluminum alloys at high strains JO - Mater. Charact. VL - 5803 UR - https://doi.org/10.1016/1044-5803(95)00062-3 DO - 10.1016/1044-5803(95)00062-3 ID - Konopleva1995 ER - TY - JOUR AU - Langhelle, N. K. PY - 1996 DA - 1996// TI - Buckling tests of aluminium columns at elevated temperatures JO - Proc Int Conf Offshore Mech Arct Eng - OMAE VL - 2 ID - Langhelle1996 ER - TY - STD TI - Langhelle NK, Amdahl J (2001) Experimental and numerical analysis of aluminium columns subjected to fire. In: Proc. 11th Int. Offshore Polar Eng. Conf., Stavenger, Norway, 17-22 June, 2001 ID - ref66 ER - TY - JOUR AU - Larson, F. PY - 1952 DA - 1952// TI - A time-temperature relationship for rupture and creep stresses JO - Am Soc Mech Eng Trans VL - 74 ID - Larson1952 ER - TY - JOUR AU - Last, H. R. AU - Garrett, R. K. PY - 1996 DA - 1996// TI - Mechanical behavior and properties of mechanically alloyed aluminum alloys JO - Metall Mater Trans A VL - 27 UR - https://doi.org/10.1007/BF02648961 DO - 10.1007/BF02648961 ID - Last1996 ER - TY - JOUR AU - Leckie, F. A. AU - Hayhurst, D. R. PY - 1974 DA - 1974// TI - Creep rupture of structures JO - Proc R Soc A Math Phys Eng Sci VL - 340 UR - https://doi.org/10.1098/rspa.1974.0155 DO - 10.1098/rspa.1974.0155 ID - Leckie1974 ER - TY - JOUR AU - Lin, J. AU - Liu, Y. AU - Dean, T. A. PY - 2005 DA - 2005// TI - A review on damage mechanisms, models and calibration methods under various deformation conditions JO - Int J Damage Mech VL - 14 UR - https://doi.org/10.1177/1056789505050357 DO - 10.1177/1056789505050357 ID - Lin2005 ER - TY - JOUR AU - Liu, R. AU - Salahshoor, M. AU - Melkote, S. N. AU - Marusich, T. PY - 2014 DA - 2014// TI - A unified internal state variable material model for inelastic deformation and microstructure evolution in SS304 JO - Mater Sci Eng A VL - 594 UR - https://doi.org/10.1016/j.msea.2013.11.071 DO - 10.1016/j.msea.2013.11.071 ID - Liu2014 ER - TY - JOUR AU - Maisonnette, D. AU - Suery, M. AU - Nelias, D. AU - Chaudet, P. AU - Epicier, T. PY - 2011 DA - 2011// TI - Effects of heat treatments on the microstructure and mechanical properties of a 6061 aluminium alloy JO - Mater Sci Eng A VL - 528 UR - https://doi.org/10.1016/j.msea.2010.12.011 DO - 10.1016/j.msea.2010.12.011 ID - Maisonnette2011 ER - TY - JOUR AU - Maljaars, J. AU - Fellinger, J. AU - Soetens, F. PY - 2005 DA - 2005// TI - Fire exposed aluminium structures JO - HERON VL - 50 ID - Maljaars2005 ER - TY - JOUR AU - Maljaars, J. AU - Soetens, F. AU - Katgerman, L. PY - 2008 DA - 2008// TI - Constitutive model for aluminum alloys exposed to fire conditions JO - Metall Mater Trans A VL - 39 UR - https://doi.org/10.1007/s11661-008-9470-0 DO - 10.1007/s11661-008-9470-0 ID - Maljaars2008 ER - TY - JOUR AU - Maljaars, J. AU - Soetens, F. AU - Snijder, H. H. PY - 2009 DA - 2009// TI - Local buckling of aluminium structures exposed to fire. Part 1: Tests JO - Thin-Walled Struct VL - 47 UR - https://doi.org/10.1016/j.tws.2009.02.008 DO - 10.1016/j.tws.2009.02.008 ID - Maljaars2009 ER - TY - JOUR AU - Maljaars, J. AU - Soetens, F. AU - Snijder, H. H. PY - 2009 DA - 2009// TI - Local buckling of aluminium structures exposed to firePart 2: Finite element models JO - Thin-Walled Struct VL - 47 UR - https://doi.org/10.1016/j.tws.2008.06.003 DO - 10.1016/j.tws.2008.06.003 ID - Maljaars2009 ER - TY - STD TI - Matulich RD (2011) Post-fire mechanical properties of aluminum alloys and aluminum welds. Thesis, Virginia Polytechnic Institute & State University ID - ref77 ER - TY - BOOK AU - Mazzolani, F. M. PY - 1995 DA - 1995// TI - Aluminum alloy structures PB - Hall CY - London, UK ID - Mazzolani1995 ER - TY - JOUR AU - McQueen, H. J. AU - Ryum, N. PY - 1985 DA - 1985// TI - Hot working and subsequent static recrystallization of Al and Al-Mg alloys JO - Scand J Metall VL - 14 ID - McQueen1985 ER - TY - JOUR AU - Mecking, H. AU - Kocks, U. F. PY - 1981 DA - 1981// TI - Kinetics of flow and strain-hardening JO - Acta Metall VL - 29 UR - https://doi.org/10.1016/0001-6160(81)90112-7 DO - 10.1016/0001-6160(81)90112-7 ID - Mecking1981 ER - TY - JOUR AU - Myhr, O. R. AU - Grong, Ø. PY - 1991 DA - 1991// TI - Process modelling applied to 6082-T6 aluminium weldments–I. Reaction kinetics JO - Acta Metall VL - 39 UR - https://doi.org/10.1016/0956-7151(91)90085-F DO - 10.1016/0956-7151(91)90085-F ID - Myhr1991 ER - TY - JOUR AU - Myhr, O. R. AU - Grong, Ø. PY - 1991 DA - 1991// TI - Process modelling applied to 6082-T6 aluminium weldments—II. Applications of model JO - Acta Metall Mater VL - 39 UR - https://doi.org/10.1016/0956-7151(91)90086-G DO - 10.1016/0956-7151(91)90086-G ID - Myhr1991 ER - TY - JOUR AU - Myhr, O. R. AU - Grong, Ø. PY - 2000 DA - 2000// TI - Modelling of non-isothermal transformations in alloys containing a particle distribution JO - Acta Mater VL - 48 UR - https://doi.org/10.1016/S1359-6454(99)00435-8 DO - 10.1016/S1359-6454(99)00435-8 ID - Myhr2000 ER - TY - JOUR AU - Myhr, O. R. AU - Grong, Ø. AU - Andersen, S. J. PY - 2001 DA - 2001// TI - Modelling of the age hardening behaviour of Al-Mg-Si alloys JO - Acta Mater VL - 49 UR - https://doi.org/10.1016/S1359-6454(00)00301-3 DO - 10.1016/S1359-6454(00)00301-3 ID - Myhr2001 ER - TY - CHAP AU - Myhr, O. R. AU - Grong, Ø. AU - Klokkehaug, S. AU - Fjaer, H. G. ED - Cerjak, H. PY - 2002 DA - 2002// TI - Modelling of the microstructure and strength evolution during ageing and welding of Al–Mg–Si alloys BT - Mathematical modeling of weld phenomena, vol 6 PB - Maney CY - London, UK ID - Myhr2002 ER - TY - JOUR AU - Myhr, O. R. AU - Grong, Ø. AU - Fjær, H. G. AU - Marioara, C. D. PY - 2004 DA - 2004// TI - Modelling of the microstructure and strength evolution in Al-Mg-Si alloys during multistage thermal processing JO - Acta Mater VL - 52 UR - https://doi.org/10.1016/j.actamat.2004.07.002 DO - 10.1016/j.actamat.2004.07.002 ID - Myhr2004 ER - TY - JOUR AU - Nicolas, M. AU - Deschamps, A. PY - 2003 DA - 2003// TI - Characterisation and modelling of precipitate evolution in an Al–Zn–Mg alloy during non-isothermal heat treatments JO - Acta Mater VL - 51 UR - https://doi.org/10.1016/S1359-6454(03)00429-4 DO - 10.1016/S1359-6454(03)00429-4 ID - Nicolas2003 ER - TY - JOUR AU - Perez, M. AU - Dumont, M. AU - Acevedo-Reyes, D. PY - 2008 DA - 2008// TI - Implementation of classical nucleation and growth theories for precipitation JO - Acta Mater VL - 56 UR - https://doi.org/10.1016/j.actamat.2007.12.050 DO - 10.1016/j.actamat.2007.12.050 ID - Perez2008 ER - TY - CHAP AU - Poole, W. J. AU - Lloyd, D. J. PY - 2004 DA - 2004// TI - Modelling the stress-strain behaviour for aluminum alloy AA6111 BT - Proceeding 9th Int. Conf. Alum PB - Alloys CY - Brisbane, Australia ID - Poole2004 ER - TY - JOUR AU - Popović, M. AU - Romhanji, E. PY - 2008 DA - 2008// TI - Characterization of microstructural changes in an Al-6.8wt.% Mg alloy by electrical resistivity measurements JO - Mater Sci Eng A VL - 492 UR - https://doi.org/10.1016/j.msea.2008.04.001 DO - 10.1016/j.msea.2008.04.001 ID - Popović2008 ER - TY - BOOK AU - Rabotnov, Y. N. PY - 1969 DA - 1969// TI - Creep problems in structural members PB - North-Holland CY - Amsterdam ID - Rabotnov1969 ER - TY - JOUR AU - Raj, R. AU - Ashby, M. F. PY - 1975 DA - 1975// TI - Intergranular fracture at elevated temperature JO - Acta Metall VL - 23 UR - https://doi.org/10.1016/0001-6160(75)90047-4 DO - 10.1016/0001-6160(75)90047-4 ID - Raj1975 ER - TY - JOUR AU - Ryen, Ø. AU - Nijs, O. AU - Sjölander, E. AU - Holmedal, B. AU - Ekström, H. -. E. AU - Nes, E. PY - 2006 DA - 2006// TI - Strengthening mechanisms in solid solution aluminum alloys JO - Metall Mater Trans A VL - 37 UR - https://doi.org/10.1007/s11661-006-0142-7 DO - 10.1007/s11661-006-0142-7 ID - Ryen2006 ER - TY - JOUR AU - Simar, A. AU - Bréchet, Y. AU - Meester, B. AU - Denquin, A. AU - Pardoen, T. PY - 2007 DA - 2007// TI - Sequential modeling of local precipitation, strength and strain hardening in friction stir welds of an aluminum alloy 6005A-T6 JO - Acta Mater VL - 55 UR - https://doi.org/10.1016/j.actamat.2007.07.012 DO - 10.1016/j.actamat.2007.07.012 ID - Simar2007 ER - TY - JOUR AU - Simar, A. AU - Bréchet, Y. AU - Meester, B. AU - Denquin, A. AU - Pardoen, T. PY - 2008 DA - 2008// TI - Microstructure, local and global mechanical properties of friction stir welds in aluminium alloy 6005A-T6 JO - Mater Sci Eng A VL - 486 UR - https://doi.org/10.1016/j.msea.2007.08.041 DO - 10.1016/j.msea.2007.08.041 ID - Simar2008 ER - TY - STD TI - Summers PT (2014) Microstructure-based constitutive models for residual mechanical behavior of aluminum alloys after fire exposure. Dissertation, Virginia Polytechnic Institute & State University ID - ref96 ER - TY - BOOK AU - Summers, P. T. AU - Matulich, R. D. AU - Case, S. W. AU - Lattimer, B. PY - 2012 DA - 2012// TI - Post-fire mechanical properties and hardness of 5083 and 6082 aluminum alloys PB - ASME IMECE 2012 CY - Houston, USA UR - https://doi.org/10.1115/IMECE2012-88175 DO - 10.1115/IMECE2012-88175 ID - Summers2012 ER - TY - JOUR AU - Summers, P. T. AU - Case, S. W. AU - Lattimer, B. Y. PY - 2014 DA - 2014// TI - Residual mechanical properties of aluminum alloys AA5083-H116 and AA6061-T651 after fire JO - Eng Struct VL - 76 UR - https://doi.org/10.1016/j.engstruct.2014.06.033 DO - 10.1016/j.engstruct.2014.06.033 ID - Summers2014 ER - TY - JOUR AU - Sun, S. AU - Sundararaghavan, V. PY - 2012 DA - 2012// TI - A probabilistic crystal plasticity model for modeling grain shape effects based on slip geometry JO - Acta Mater VL - 60 UR - https://doi.org/10.1016/j.actamat.2012.05.039 DO - 10.1016/j.actamat.2012.05.039 ID - Sun2012 ER - TY - JOUR AU - Suzuki, J. AU - Ohmiya, Y. AU - Wakamatsu, T. AU - Haradaz, K. AU - Yusa, S. AU - Kohno, M. PY - 2005 DA - 2005// TI - Evaluation of fire resistance of aluminum alloy members JO - Fire Sci Technol VL - 24 UR - https://doi.org/10.3210/fst.24.237 DO - 10.3210/fst.24.237 ID - Suzuki2005 ER - TY - JOUR AU - Trinkaus, H. AU - Yoo, M. H. PY - 1987 DA - 1987// TI - Nucleation under time-dependent supersaturation JO - Philos Mag A VL - 55 UR - https://doi.org/10.1080/01418618708209867 DO - 10.1080/01418618708209867 ID - Trinkaus1987 ER - TY - BOOK PY - 1990 DA - 1990// TI - Rapid rise fire tests of protection materials for structural steel PB - ANSI/UL 1709 CY - Northbrook, IL ID - ref102 ER - TY - JOUR AU - Vandermeer, R. A. AU - Hansen, N. PY - 2008 DA - 2008// TI - Recovery kinetics of nanostructured aluminum: Model and experiment JO - Acta Mater VL - 56 UR - https://doi.org/10.1016/j.actamat.2008.07.038 DO - 10.1016/j.actamat.2008.07.038 ID - Vandermeer2008 ER - TY - JOUR AU - Vandermeer, R. A. AU - Juul Jensen, D. PY - 1994 DA - 1994// TI - Modeling microstructural evolution of multiple texture components during recrystallization JO - Acta Metall Mater VL - 42 UR - https://doi.org/10.1016/0956-7151(94)90321-2 DO - 10.1016/0956-7151(94)90321-2 ID - Vandermeer1994 ER - TY - JOUR AU - Vandermeer, R. A. AU - Juul Jensen, D. PY - 2001 DA - 2001// TI - Microstructural path and temperature dependence of recrystallization in commercial aluminum JO - Acta Mater VL - 49 UR - https://doi.org/10.1016/S1359-6454(01)00074-X DO - 10.1016/S1359-6454(01)00074-X ID - Vandermeer2001 ER - TY - JOUR AU - Vandermeer, R. A. AU - Rath, B. B. PY - 1990 DA - 1990// TI - Interface migration during recrystallization: the role of recovery and stored energy gradients JO - Metall Trans A VL - 21 UR - https://doi.org/10.1007/BF02698245 DO - 10.1007/BF02698245 ID - Vandermeer1990 ER - TY - JOUR AU - Verdier, M. AU - Brechet, Y. AU - Guyot, P. PY - 1998 DA - 1998// TI - Recovery of AlMg alloys: flow stress and strain-hardening properties JO - Acta Mater VL - 47 UR - https://doi.org/10.1016/S1359-6454(98)00350-4 DO - 10.1016/S1359-6454(98)00350-4 ID - Verdier1998 ER - TY - JOUR AU - Verdier, M. AU - Janecek, M. AU - Bréchet, Y. AU - Guyot, P. PY - 1998 DA - 1998// TI - Microstructural evolution during recovery in Al–2.5% Mg alloys JO - Mater Sci Eng A VL - 248 UR - https://doi.org/10.1016/S0921-5093(98)00488-2 DO - 10.1016/S0921-5093(98)00488-2 ID - Verdier1998 ER - TY - JOUR AU - Wen, W. AU - Morris, J. G. PY - 2003 DA - 2003// TI - An investigation of serrated yielding in 5000 series aluminum alloys JO - Mater Sci Eng A VL - 354 UR - https://doi.org/10.1016/S0921-5093(03)00017-0 DO - 10.1016/S0921-5093(03)00017-0 ID - Wen2003 ER - TY - JOUR AU - Xing, Q. AU - Huang, X. AU - Hansen, N. PY - 2006 DA - 2006// TI - Recovery of heavily cold-rolled aluminum: Effect of local texture JO - Metall Mater Trans A VL - 37 UR - https://doi.org/10.1007/s11661-006-1083-x DO - 10.1007/s11661-006-1083-x ID - Xing2006 ER - TY - JOUR AU - Yoo, M. H. AU - Trinkaus, H. PY - 1986 DA - 1986// TI - Interaction of slip with grain boundary and its role in cavity nucleation JO - Acta Metall VL - 34 UR - https://doi.org/10.1016/0001-6160(86)90141-0 DO - 10.1016/0001-6160(86)90141-0 ID - Yoo1986 ER -